BIVO-98 98Wh Bi-voltage B-mount Battery Pack

›  14.4V/28.8V Bi-voltage B-mount

›  98Wh fly-friendly capacity

›  150W constant high load

›  33.6V 44W fast charging

›  D-tap 11-16.8V output ×2

›  LED power & voltage indicators

›  Built-in LED torch

›  Strong 1.2m drop off proof

›  Multiple circuit protections


Features

14.4V/28.8V Bi-Voltage
B-mount Battery

BIVO-98 is a 14.4V(11-16.8V) and 28.8V (22-33.6V) Bi-voltage B-mount battery, for ARRI cameras and various compatible with regular voltage cameras and cinegears. The battery will recognize the ID pin resistor value of the B-mount plate, and then output 14.4V or 28.8V, without any misuse risks.

98Wh Fly Friendly Capacity

BIVO-98 battery is only 38mm thickness and 668g light weight for handheld shooting. It's 98Wh capacity, run at least 1 hour on ARRI ALEXA 35 camera, and not being restricted to board airplane.
The battery provides at least 150W constant power load for cine cameras and devices.

2x D-tap Power Output

BIVO-98 provides with 2x D-tap power sockets.
When the battery works at 14.4V voltage,
the D-tap outputs 11-16.8V;
When the battery works at 28.8V voltage,
the D-tap output regulated 16V,
to power all kinds of camera-top devices.

BIVO Series Family

The BIVO series Bi-voltage B-mount battery famaily has 98Wh, 160Wh, 196Wh, 290Wh, the different sizes and capacities, for stablizer handheld light weight or long time power selection.

LED Power/Voltage Indicators

BIVO-98 has 4-level LED power indicators and an independent blue LED to indicate battery voltage. When the battery attached to B-mount plate, the blue LED turned on means the battery outputs 28.8V high voltage, and the blue LED off means the battery is 14.4V regular voltage.

33.6V Fast Charging

You can charge 4x BIVO-98 simultaneously on SWIT PC-P461B B-mount charger, at 33.6V, 44W fast charging. The charger will take approx. 3 hours to fully charge 4x BIVO-98 batteries.

LED Torch

You can double press the Power Check button to switch on LED torch on the rear side of the battery, to help you to find B-mount plate in dark production environment.
Double press the Power Check button again to switch the light off, and it will be automatically switched off after 30 seconds.

1.2 meters Drop-off Proof

BIVO-98 battery can survive from 1.2 meters drop-off at any angles, strong and reliable for filmmakers.

无标题文档

Voltage

28.8V (21.6-33.6V) & 14.4V (10.8-16.8V)

Capacity

98Wh

Constant load

150W

Charging

33.6V 44W fast charging

Mount Type

B-mount

D-tap ×2

14.4V status: 10.8-16.8V out, 150W load
28.8V status: 16V regulated out, 50W load

Charging Temperature

0-40°C
      Discharging Temperature-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)

Net weight

Approx 668g

Dimensions

144×100×38mm
Basic Package

MSRP

MSRP

MSRP

  • HB-A290B

    290Wh 28.8V B-mount Battery Pack

    ALEXA 35 battery, 250W/10A high load, D-tap 16V x2, USB-C 60W in&out, OLED power info

  • PC-P461B

    4x100W Super Fast B-mount Charger

    3h50m fully charge 4x 290Wh batteries, 3.5-inch color LCD screen

  • KA-B30B

    B-mount to B-mount Hotswap Plate

    200W high load, 2 minutes hot-swap, countdown seconds display, CNC housing

  • BIVO-160

    160Wh Bi-voltage B-mount Battery Pack

    14.4V/28.8V auto switch, ALEXA35 battery, 200W high load, D-tap 16V out

  • BIVO-200

    196Wh Bi-voltage B-mount Battery Pack

    14.4V/28.8V auto switch, ALEXA35 battery, 200W high load, D-tap 16V out

  • BIVO-290

    290Wh Bi-voltage B-mount Battery Pack

    14.4V/28.8V auto switch, ALEXA35 battery, 250W high load, D-tap 16V out

û
¼

leave a message

Name :
Country :
*E-mail :
*Msg :

This Privacy Policy governs the manner in which SWIT collects, uses, maintains and discloses information collected from users (each, a “User”) of the www.switeu.com, swit-electronics-europe-gmbh-1.gogecko.com website (“Site”). This privacy policy applies to the Site and all products and services offered by SWIT.
Personal identification information
We may collect personal identification information from Users in a variety of ways, including, but not limited to, when Users visit our site, register on the site, place an order, respond to a survey, fill out a form, and in connection with other activities, services, features or resources we make available on our Site. Users may be asked for, as appropriate, name, email address, mailing address, phone number. Users may, however, visit our Site anonymously. We will collect personal identification information from Users only if they voluntarily submit such information to us. Users can always refuse to supply personally identification information, except that it may prevent them from engaging in certain Site related activities.
Non-personal identification information
We may collect non-personal identification information about Users whenever they interact with our Site. Non-personal identification information may include the browser name, the type of computer and technical information about Users means of connection to our Site, such as the operating system and the Internet service providers utilized and other similar information.
Web browser cookies
Our Site may use “cookies” to enhance User experience. User’s web browser places cookies on their hard drive for record-keeping purposes and sometimes to track information about them. User may choose to set their web browser to refuse cookies, or to alert you when cookies are being sent. If they do so, note that some parts of the Site may not function properly.
How we use collected information
SWIT may collect and use Users personal information for the following purposes:
– To improve customer service
Information you provide helps us respond to your customer service requests and support needs more efficiently.
– To personalize user experience
We may use information in the aggregate to understand how our Users as a group use the services and resources provided on our Site.
– To improve our Site
We may use feedback you provide to improve our products and services.
– To process payments
We may use the information Users provide about themselves when placing an order only to provide service to that order. We do not share this information with outside parties except to the extent necessary to provide the service. Those outside parties do not share, store or use personally identifiable information for any secondary purposes beyond providing the service.
– To run a promotion, contest, survey or other Site feature
To send Users information they agreed to receive about topics we think will be of interest to them.
– To send periodic emails
We may use the email address to send User information and updates pertaining to their order. It may also be used to respond to their inquiries, questions, and/or other requests. If User decides to opt-in to our mailing list, they will receive emails that may include company news, updates, related product or service information, etc. If at any time the User would like to unsubscribe from receiving future emails, we include detailed unsubscribe instructions at the bottom of each email.

How we protect your information
We adopt appropriate data collection, storage and processing practices and security measures to protect against unauthorized access, alteration, disclosure or destruction of your personal information, username, password, transaction information and data stored on our Site.
Sensitive and private data exchange between the Site and its Users happens over a SSL secured communication channel and is encrypted and protected with digital signatures.
Sharing your personal information
We do not sell, trade, or rent Users personal identification information to others. We may share generic aggregated demographic information not linked to any personal identification information regarding visitors and users with our business partners, trusted affiliates and advertisers for the purposes outlined above. We may use third party service providers to help us operate our business and the Site or administer activities on our behalf, such as sending out newsletters or surveys. We may share your information with these third parties for those limited purposes provided that you have given us your permission. Those outside parties do not share, store or use personally identifiable information for any secondary purposes beyond providing the service.
Third party websites
Users may find advertising or other content on our Site that link to the sites and services of our partners, suppliers, advertisers, sponsors, licensors and other third parties. We do not control the content or links that appear on these sites and are not responsible for the practices employed by websites linked to or from our Site. In addition, these sites or services, including their content and links, may be constantly changing. These sites and services may have their own privacy policies and customer service policies. Browsing and interaction on any other website, including websites which have a link to our Site, is subject to that website’s own terms and policies.
Changes to this privacy policy
SWIT has the discretion to update this privacy policy at any time. When we do, we will post a notification on the main page of our Site, revise the updated date at the bottom of this page and send you an email. We encourage Users to frequently check this page for any changes to stay informed about how we are helping to protect the personal information we collect. You acknowledge and agree that it is your responsibility to review this privacy policy periodically and become aware of modifications.
Your acceptance of these terms
By using this Site, you signify your acceptance of this policy and terms of service. If you do not agree to this policy, please do not use our Site. Your continued use of the Site following the posting of changes to this policy will be deemed your acceptance of those changes.
Contacting us
If you have any questions about this Privacy Policy, the practices of this site, or your dealings with this site, please contact us at:
SWIT Electronics Europe GmbH
Hochstr.17, 47228 Duisburg, Germany
Email: info@swit-europe.com
Tel: +49 020659799339